2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

A plasticity constitutive model for unsaturated,anisotropic, nonexpansive soils     

Panagiotis Sitarenios  Michael Kavvadas 《国际地质力学数值与分析法杂志》2020,44(4):435-454

The paper describes and evaluates an incremental plasticity constitutive model for unsaturated, anisotropic, nonexpansive soils (CMUA). It is based on the modified Cam-Clay (MCC) model for saturated soils and enhances it by introducing anisotropy (via rotation of the MCC yield surface) and an unsaturated compressibility framework describing a double dependence of compressibility on suction and on the degree of saturation of macroporosity. As the anisotropic and unsaturated features can be activated independently, the model is downwards compatible with the MCC model. The CMUA model can simulate effectively: the dependence of compressibility on the level of developed anisotropy, uniqueness of critical state independent of the initial anisotropy, an evolving compressibility during constant suction compression, and a maximum of collapse. The model uses Bishop's average skeleton stress as its first constitutive variable, favouring its numerical implementation in commercial numerical analysis codes (eg, finite element codes) and a unified treatment of saturated and unsaturated material states.  相似文献   

Inference of in situ stress from thermoporoelastic borehole breakouts based on artificial neural network     

Hua Zhang  Shunde Yin 《国际地质力学数值与分析法杂志》2019,43(16):2493-2511

The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress.  相似文献   

Geochemical evolution of groundwater in hard-rock aquifers of South India using statistical and modelling techniques     

Annadasankar Roy  Hemant Mohokar  Diksha Pant  Uday Kumar Sinha  G. N. Mendhekar 《水文科学杂志》2020,65(6):951-968

ABSTRACT

Multivariate statistical analysis and inverse geochemical modelling techniques were employed to deduce the mechanism of groundwater evolution in the hard-rock terrain of Telangana, South India. Q-mode hierarchical cluster analysis (HCA) and principal component analysis (PCA) were used to extract the hydrogeochemical characteristics and classify the groundwater samples into three principal groups. Use of thermodynamic stability diagrams and inverse geochemical modelling in PHREEQC identified the chemical reactions controlling hydrogeochemistry of each of the groups obtained from statistical analysis. The model output showed that a few phases are governing the water chemistry in this area and the geochemical reactions responsible for evolution of groundwater chemistry along the flow path are (i) dissolution of evaporite minerals (dolomite, halite); (ii) dissolution of primary silicate minerals (albite, anorthite, K-feldspar, biotite); (iii) precipitation of secondary silicate minerals (kaolinite, quartz, gibbsite, Ca-montmorillonite) along with anhydrite and calcite; and (iv) reverse ion exchange processes.  相似文献   

横观各向同性场地中埋置衬砌隧道对qP波的散射          下载免费PDF全文

巴振宁  安东辉  梁建文  高旭 《地震工程学报》2020,42(4):948-954

采用间接边界元法(IBEM)结合"分区契合"技术,研究qP波入射下横观各向同性(TI)场地中衬砌隧道的动力响应问题。方法充分利用半空间和全空间动力格林函数在分别构造含孔半无限空间域和闭合域内散射波场方面的优势,将含有衬砌隧道的层状弹性半空间分解为含孔半无限空间域和一个环形衬砌闭合域来分别进行波场构造,有效地降低了求解时间和存储量。文中验证方法的正确性,并以均匀TI半空间和基岩上单一TI土层为例,计算分析弹性半空间场地中隧道衬砌内表面动应力放大问题。结果表明qP波入射下,TI介质与各向同性介质场地中埋置衬砌隧道的动力响应差异显著,TI介质参数的变化导致场地动力特性的改变,进而改变场地与衬砌隧道的动力相互作用机制,显著影响着衬砌内表面动应力的大小及其空间分布。  相似文献   

铁路路基粗粒土填料临界动应力试验研究     

王康宇  庄妍  耿雪玉 《岩土力学》2020,41(6):1865-1873

粗粒土填料被广泛应用于铁路基床填料中，直接承受轨道结构传递的列车动循环荷载的长期作用，研究其在列车动荷载作用下的动力行为特征及塑性变形特性可为路基状态评估、沉降控制提供思路。采用GDS动三轴试验系统对铁路基床表层的粗粒土填料动力响应开展研究，通过引入塑性应变率和安定理论，将不同频率、围压、循环动应力比等条件下路基填料的轴向塑性应变的发展规律划分为塑性安定、塑性蠕变和增量塑性破坏3种类型，并确定了塑性安定和塑性蠕变状态的临界动应力水平。研究表明：粗粒土填料的临界循环应力比随着围压的增大而增大，随着荷载频率的增加而减小。通过对试验结果的拟合分析，提出了以围压为变量的临界动应力经验公式，为合理评估列车荷载作用下路基任意深度的动力稳定提供了理论依据。  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献   

基于新型高频声学多普勒流速剖面仪的河口近底部边界层观测初探     

兰庭飞  吴昊  唐杰平  李占海  汪亚平 《海洋通报》2019,38(6):640-649

河口物质输运、能量交换与底边界层内的水动力过程密切相关,底边界层参数(如切应力、拖曳系数)的确定至关重要。挪威Nortek公司生产的新型声学多普勒流速剖面仪AD2CP相比传统ADCP具有高频、低噪的优点,可用于高频(16Hz)流速剖面观测,而被广泛应用于底边界层观测的ADV只能测量单点高频流速。本文采用AD2CP在长江口南槽最大浑浊带区域进行座底式观测,并与同步近底部三脚架上ADV的观测结果进行对比。结果表明,使用AD2CP测得的近底部平均流速与ADV的测量结果吻合良好;使用惯性耗散法计算了底切应力,基于ADV的单点高频流速数据计算结果为2.16×10~(-2)～5.69×10~(-1)N/m~2,基于AD2CP的结果为2.09×10~(-2)～4.26×10~(-1)N/m~2,二者范围大致相当。在此基础上,基于AD2CP数据计算出摩阻流速为4.55×10~(-3)～2.06×10~(-2)m/s、底拖曳系数范围为1.84×10~(-4)～2.49×10~(-3),与ADV的计算结果基本一致。此外,由于AD2CP可以获得高频的流速剖面数据,优于单点ADV,具备观测近底部边界层参数和边界层内湍流剖面的潜力。  相似文献   

A study of coral reef resilience and implications of adaptive management and rehabilitation in Khanh Hoa Province, Vietnam     

VO Si Tuan  HUA Thai Tuyen  PHAN Kim Hoang 《海洋学报(英文版)》2019,38(1):112-117

The Province of Khanh Hoa, Vietnam, is located in the western South China Sea and boasts a shoreline of 385 km and many islands. Previous studies have indicated the extreme diversity and abundance of coral reefs in its waters as compared with other coastal provinces of Vietnam. A study on the resilience of coral reefs against increased surface water temperature and anthropogenic impact is conducted at 19 reef sites in 2015. At each site, a series of parameters (e.g., coral covers, genus diversity, and coral recruitment, substratum heterogeneity, depth, water exchange level, and sediment deposit and water temperature) are measured quantitatively or semi-quantitatively. The measured data are rated based on the relationship between the parameter values and coral susceptibility; the consideration that reef health reflects the biological capability to adapt to environmental changes and the recruitment potential if bleached; and positive or negative influences of physical factors in the mitigation of thermal stress and protecting corals from bleaching. A cumulative analysis enables researchers to divide the studied reefs into four categories based on varying levels of reef health to support resilience, recovery, and vulnerability in the case of increased water temperature. Relevant management interventions for each category and other supporting activities are suggested to enhance management effectiveness and to plan the rehabilitation of coral reefs for biodiversity conservation and touristic development, taking into account the involvement of related stakeholders.  相似文献   

Bragg reflection of water waves by multiple floating horizontal flexible membranes with submerged rectangular bars on the seabed     

《Applied Ocean Research》2019

Bragg reflection of water waves by multiple floating horizontal flexible membranes is investigated based on the linear wave theory and the assumption of small membrane response. Under the floating horizontal membranes, periodical submerged rectangular bars are arranged on the flat seabed. The total reflection and transmission coefficients are obtained by using the eigenfunction expansion method and the wide spacing approximation. The calculated coefficients are validated with the results available in the literature, which shows that the present method is applicable. The characteristics of Bragg reflection are systematically investigated by changing various parameters including the height of the rectangular bars, the number, the tension, the spacing, and the length of the flexible membranes. The results can help designing multiple floating horizontal flexible membranes as effective floating breakwaters by taking advantage of Bragg reflection.  相似文献